A6 Quattro Sedan V6-2.8L (AFC) (1995)
/Page-2243001.png)
Transmission Speed Sensor: Service and Repair
SPEEDOMETER VEHICLE SPEED SENSOR AND DRIVE GEAR FOR SPEEDOMETER
Note: These parts can be replaced with the transmission installed.
Replacing Speedometer Vehicle Speed Sensor
-
Disconnect harness connector from sensor -A-.
-
Press down clamp and carefully remove sensor; do not damage sensor, or speed may not be indicated accurately.
-
Check seal -B- when installing; replace if necessary.
Replacing Drive Gear For Speedometer
-
Disconnect drive axle from flanged shaft on left side.
-
Remove drive flange and seal -B-. Remove drive gear -A- for speedometer by prying evenly at studs (arrows -1-).
Installing
-
Flange (arrow -2-) faces the differential housing.
-
Driver studs of drive gear then face seal -B- and engage in grooves on differential housing.
-
Replace seal -B- and circlip -C- for flanged shaft.
-
Top up gear oil.
