A6 Quattro Sedan V6-2.8L (AFC) (1995)
Removing and Installing Clutch
A =Centering tool 3176
-
Loosen or tighten bolts evenly and in stages, alternating in diagonal pattern.
*
Change position of holding tool 10-201 when removing.
*
Tightening torque: 25 Nm (18 ft lb)
CAUTION!
-
Pressure plate must fit over alignment pins and make complete contact with flywheel Do not insert the mounting bolts before this.
-
Under no circumstances should force be exerted on the pressure plate. Otherwise, centering holes in pressure plate and centering pins in flywheel
will be damaged.
Checking Ends Of Diaphragm-Spring
-
Wear equalling up to half the diaphragm-spring thickness is permissible.
CAUTION! For repairs, it is essential to match the clutch pressure plate and the clutch disc according to engine application using the Parts Information.