A6 Quattro Sedan V6-2.8L (AFC) (1995)
/Page-2351003.png)
- Press CV joint on to stop.
- Install circlip.
CAUTION! Chamfer on inner diameter of the ball hub (teeth) must point toward the drive axle collar.
Fig. 3 Tightening boot clamps
Fig. 4 Pressing off outer cv joint
- Clamp drive axle in vice using protective jaws.
- Remove boot clamp.
- Push back CV joint boot.
- Turn in M16 threaded end of special tool 3207 until CV joint is pressed off splined shaft
