A6 Quattro Sedan V6-2.8L (AFC) (1995)
Constant Velocity Joint: Service and Repair
With Manual Transmission
Drive axle, repairing
Vehicles with manual transmission
Note: Constant velocity (CV) joints are packed with G6 grease.
Re-grease the joints, if necessary, when replacing the CV joint boots.
1. Circlip
Remove and install with standard circlip pliers
2. Gasket
Always replace, remove protective backing and install on CV joint
3. CV joint, inner
108 mm (4.2 in) outer diameter
Replace only as complete assembly
Removing - Fig. 1
Installing - Fig. 2