A6 Quattro Sedan V6-2.8L (AFC) (1995)
/Page-2341001.png)
Seals and Gaskets: Service and Repair
REAR FINAL DRIVE FLANGED SHAFT OIL SEALS
OIL SEAL FOR RIGHT FLANGED SHAFT
(Final Drive Installed)
-
Unscrew cover (arrows).
-
Detach parking brake cable at right brake caliper.
-
Disconnect trapezoidal arm from crossmember (arrow -A-) and carefully lower with transmission jack VAG 1883 A and vehicle jack support.
-
Press parking brake cable out of holder (arrow -B-).
-
Disconnect drive axle (arrow -C-) and lower. Press trapezoidal arm to right.
-
Loosen flanged shaft.
To loosen mounting bolt, screw two bolts into flanged shaft and hold tight with assembly lever.
-
Place oil drain tray below and remove flanged shaft.
-
Press out seal with assembly lever.
