A6 Quattro Sedan V6-2.8L (AHA) (1998)
Power Trunk / Liftgate Lock Switch: Service and Repair
Removing
-
Remove rear lid lock
-
Disconnect electrical connector.
-
With rear lid lock -1- removed, use flat screwdriver to release plastic tab -3- at two rivets -4-.
-
Press lever -2- in direction of arrow and pull back plastic tab -3-.
-
Carefully remove contact switch -3- from trunk lock -1-.
Installing
-
Carefully place contact switch in mounting in rear lid lock.
-
Push back plastic tab -2- to original position and snap contact switch in place.
-
Reconnect electrical connector.
-
Install rear lid lock.