A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-8865004.png)
-
Using a flat-headed screwdriver, pull out wire cable - 9 - at metal disc - 10 - (toward B-pillar, pull hard, about 40 mm) until A-pillar trim -
1 -disengages audibly.
-
Disengage sun visor at inner catch and fold it parallel to direction of travel toward rear.
NOTE: When removing A-pillar trim - 1 -, touch only sides facing headliner or windshield.
-
Pull out lower A-pillar trim slightly at area of transition to upper A-pillar trim.
-
Pull out trim panel - 1 - at upper B-pillar.
