A6 Quattro Sedan V6-2.8L (AHA) (1998)
-
Clamp - 7 - must be positioned vertically to supporting surface.
-
Tilt clamp - 7 - to check for secure fit.
-
Clip in metal disc - 10 - at front cut-out of A-pillar trim - 1 - for grab handle.
-
Protrusion must be next to clamp - 8 - (secure using hot glue).
-
Insert A-pillar trim - 1 - between instrument panel and tension bracket at - 5 - Fig. 1.
-
Position trim at clips.
NOTE: When installing A-pillar trim, simply press on sides facing front window and headliner, do not bang or hit.