A6 Quattro Sedan V6-2.8L (AHA) (1998)
Installing
-
Install motor.
-
Springs - 2 - and - 4 - may have become disengaged from retaining hooks - 6 - and - 7 -.
WARNING: Injury risk: Springs are under strong tension.
-
Engage springs - 2 - and - 4 -.
1
-
Seat pan
2
-
Spring
3
-
Retaining hooks
4
-
Spring
5
-
Retaining hooks
6
-
Retaining hooks
7
-
Retaining hooks
Fig. 1 Removing seat height adjustment motor
-
Disconnect connector - 2 -.
-
Remove screws - 3 - (3x).
Tightening torque: 4 Nm (35 in.lb)
-
Motor - 1 - does not have a basic setting; the motor and seat can be in any position when removing and installing.