A6 Quattro Sedan V6-2.8L (AHA) (1998)
Seat Heater: Service and Repair
Seat Heating Element, Removing and Installing
Seat Heating Element, Removing And Installing
1
-
Seating area with heating element, attached to cushion foam
Removing
-
Remove seat.
-
Remove seat surface extension and disconnect both harness connectors of the heating element for the seat surface extension.
-
Pull cover off seating area.
-
Disconnect harness connector - 2 - for seat heating element at green harness connector underneath seat.
-
Remove harness connector - 3 - for seat heating element wire.
-
Release cable mounts at heated seat cable.
Installing
-
Cut cable from old heating element.
-
Secure new seat heating element onto old heating element without folding or creasing.