A6 Quattro Sedan V6-2.8L (AHA) (1998)
Seat Padding: Service and Repair
Mounting Bracket For Seat Cushion
Mounting Bracket For Seat Cushion, Removing And Installing
1
-
Mounting bracket for seat cushion
-
Remove rear seat bench.
-
Remove screws -4- (2x).
2
-
Bolts (4x)
-
Tightening torque: 30 Nm (22 ft lb)
NOTE:
-
Slide mounting tabs behind mounting bracket for seat cushion -1- when installing the solid backrest.
-
When retrofitting mounting brackets for seat cushion, on some vehicles the mounting tabs must be flattened to approx. 3 mm using a vise.
-
When installing, watch for freedom of movement of the lap belt with retractor, and if necessary, turn lap belt with retractor.