A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-2846003.png)
-
Lightly lubricate sealing lip with oil.
-
Install valve stem seal -B- (without oiling outside of seal) into 3365 valve stem seal fitting tool and carefully push it down over valve stem and up
to valve guide.
-
When installing new valve, lightly oil valve stem before installing.
Refacing valves
Valves must not be refaced. Only hand lapping is permissible.
WARNING: Observe the WARNING regarding the proper disposal of sodium-filled exhaust valves. Refer to Valve Dimensions.
