A6 Quattro Sedan V6-2.8L (AHA) (1998)
Air Register: Service and Repair
Center Instrument Panel Vent, Removing and Installing
Center Instrument Panel Vent, Removing And Installing
-
Remove glove box
-
Instrument panel piece trim, removing
NOTE:
The instrument panel vent -1- is fastened via clips -4- in the instrument panel.
-
Open vents -2-.
-
Insert special tool -A- in instrument panel vent and turn to disengage upper retainers.
-
Use screwdriver -B- to prevent upper retainers from engaging again.
NOTE: If the lower retainers cannot be loosened from the front:
-- Remove entire center section of instrument panel and also reinforcement bracket.
-- Remove storage compartment on driver's side.