A6 Quattro Sedan V6-2.8L (AHA) (1998)
If displayed values are OK:
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Switch ignition off.
Evaluation of display group 55
Display Group 55
Explanation of 4-digit display
Continuation
-
Switch ignition off.
-
Connect VAG 1598/22 test box to ECM harness connector.Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/Connecting
VAG 1598/22 Test Box" See: Computers and Control Systems/Testing and Inspection
-
Switch ignition on.
-
With throttle valve in closed throttle position, connect multimeter US 1119 (Fluke 83 or equivalent), and check resistance between ECM/test box
sockets 59 and 66.
Specified value: 3-200 Ohms
If resistance is NOT OK:
-
Disconnect 8-pin harness connector from throttle valve control module -J338-.