A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-7790004.png)
-
Disconnect connectors - 3 - and - 4 - from airbag unit.
-
Lay airbag down with the padded side upward.
Installing
-
Make sure that the connectors and the airbag engage fully (i.e. audibly).
WARNING: Make sure that nobody is in the vehicle.
See Caution for connecting Telematics battery.
-
Switch on ignition and connect battery Ground (GND) strap.
NOTE:
-
After connecting battery, check vehicle equipment (radio, clock, power windows) as per Repair Manual and/or Owner's manual.
-
If the airbag Malfunction Indicator Lamp (MIL) -K75- signals a malfunction after assembling then the DTC memory must be erased and
checked again with VAG 1551 scan tool.
