A6 Quattro Sedan V6-2.8L (AHA) (1998)
Installing
-
With belt tensioner - 1 - removed, screw in bolt - 5 - one to two turns.
-
Install belt tensioner - 1 - with bolt - 5 - in mounts and press belt tensioner - 1 - forward as far as it will go.
-
Tighten bolt - 5 -.
-
Tighten bolt - 2 -.
-
Insert webbing - 10 - into buckle trim - 3 -, without twisting.
-
Guide webbing - 10 - in direction of -arrow A- around buckle trim - 3 - and insert in the direction of -arrow B-.
-
Plug in connector - 9 -.
-
Clip belt-tensioner triggering wire into retainer - 6 -, keeping the wire taut.
-
Clip belt guide - 8 - into rear shelf - 7 -.
-
Belt-fastened sensor must be checked on vehicles with belt tensioner.