A6 Quattro Sedan V6-2.8L (AHA) (1998)
Trunk / Liftgate Switch: Service and Repair
Tailgate Contact Switch, Removing and Installing
Removing
-
Remove tailgate lock.
-
Disconnect harness connector.
-
Using a fiat screwdriver, unlock plastic catch -3- at both expanding rivets -4- on removed tailgate lock -1-.
-
Press lever -2- in direction of arrow and fold plastic catch -3- toward rear.
-
Carefully remove contact switch -3- from tailgate lock -1-.
Installing
Installation is reverse of removal, noting the following:
-
Carefully insert contact switch into the mount in rear lock.
-
Fold plastic catch -2- forward again and lock with contact switch.