A6 Quattro Sedan V6-2.8L (AHA) (1998)
Air Spring: Diagrams
Assembly overview
Tightening torque for all air lines on the Audi A6 is 2 Nm (9 inch lbs.).
1 - Self-locking hex nut, 27 Nm
^
Always replace after disassembly
^
first remove air compressor plugs
2 - Air spring
^
Installing Fig. 1
3 - Shock absorber
4 - Clip
5 - Self-locking nut, tighten to 70 Nm + tighten another 90°.
^
Always replace after disassembly
6 - Washer
7 - Air spring shock absorbers
8 - Hex bolt M12 x 1.5 x 95
^
Always replace after disassembly
9 - Connection piece
10 - Air line
^
Clip the air lines into markings provided for them.
11 - Connection piece
12 - Hex bolt, 45 Nm