A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-5390002.png)
-
Remove central bolt of right flange shaft -arrow-; hold flange shaft with drift to prevent it from turning.
-
Place VAG1306 oil drip tray below.
-
Pull out right flange shaft.
-
Use the lever VW 681 to remove seal for right flange shaft.
Installing
-
Lightly coat exterior of oil seal with transmission fluid.
-
Drive in new oil seal until impact. Do not bend or deform oil seal.
-
Installation position: gap in oil seal faces transmission.
-
Install right flange shaft.
