A6 Quattro Sedan V6-2.8L (AHA) (1998)
-
Press new grooved ball bearing into mounting bracket.
Installing oil seal
-
Lightly grease outer circumference and sealing lip of oil seal with transmission fluid.
-
Drive in new seal until press piece impact. Do not bend or deform oil seal.
-
Installation position: gap in oil seal faces transmission.
-
Install magnetic ring for Speedometer Vehicle Speed Sensor-G22- -arrow- onto flange shaft.
-
The followers on the magnetic ring must mesh into the slots on the flange shaft.
Note: Fix the location of the magnetic ring, if necessary, by coating the contact surface with petroleum jelly.