A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-5530001.png)
Shifter A/T: Service and Repair
Wiring For Shift Lock/Selector Lever Illumination/Tiptronic
REMOVING AND INSTALLING WIRING FOR SHIFT LOCK, SELECTOR LEVER ILLUMINATION AND TIPTRONIC
Removing
-
Remove center console and extension.
-
Disconnect harness connector -1- for shift lock solenoid -2- (concealed).
-
Unclip cover -3- and lift up.
-
Pull out connector -4- for gearshift positions and Tiptronic in direction shown (arrow).
-
Disconnect wiring at connector -5-.
Installing
Installation is the reverse of removal.
