A6 Quattro Sedan V6-2.8L (AHA) (1998)
Clutch Slave Cylinder: Service and Repair
-
Coat contact surface of clutch release lever plunger with a thin layer of copper grease, e.g. Z 381 351 TE
-
Before installing clutch slave cylinder into transmission housing, coat boot area -a- with G 052 150 A2 lithium grease.
-
Engage bracket for pressure line -3- into clutch slave cylinder -4- and bolt to transmission together with clutch slave cylinder.
-
Insert clutch slave cylinder straight without sideways movement of the plunger into take up hole of transmission housing.
Notes:
^
If clutch slave cylinder -4- is inserted crooked, there is a possibility that the plunger will be inserted past the clutch release Lever.
^
Pre-tension clutch slave cylinder enough so that mounting bolt can be easily inserted.
^
Remove mounting bolt -2-.