A6 Quattro Sedan V6-2.8L (AHA) (1998)
/Page-5715001.png)
Input Shaft: Service and Repair
Disassembling and Assembling
Special tools and equipment
^
VW222A pilot drift
^
VW295 needle bearing drift
^
VW295A needle-bearing drift
^
VW401 thrust plate and VW402 thrust plate
^
VW407 punch and VW408A punch
^
VW415A tube and VW416B tube
^
VW4471 thrust pad
^
VW771 slide hammer- complete set
^
30-24 Drift
^
30-100 Press tube
^
40-105 Thrust piece
^
40-202 Press out piece
^
Kukko 17/2 separating tool
^
Kukko 21/1 extractor
Notes:
^
When installing the input shaft or new gears, consult technical data.
^
If parts are exchanged which will affect the position of the ball bearings, the input shaft must be readjusted
