A6 Quattro Sedan V6-2.8L (AHA) (1998)
Fig. 7 Handle for selector lever, removing and installing
Removing
-
Move selector lever to position "3".
-
Push sleeve -1- down to stop.
-
Pull button -2- to stop (dimension "a") out of selector lever handle -3- and pull handle upward.
Dimension "a" = 3 mm
Installing
-
Move selector lever to position "3".
-
Carefully pull out knob -2- to dimension "a" out of selector lever handle -3-.
-
At the same time attach handle -3- with knob -2- in driving direction on selector lever to stop.
-
Turn handle -3- until knob -2- is pointing to driver. This causes the handle to engage into the grove of the selector lever.
-
Attach handle -3- completely to selector lever. It must engage into circular grove of selector lever.
-
Push in knob -2- in handle of selector lever -3-.
-
Pull up sleeve -1- until it engages in handle -3-.
Fig. 8 Removing and installing lock cable securing spring
Removing