A6 Quattro Sedan V6-3.0L (AVK) (2002)
Rear Door Window Regulator: Service and Repair
Window Regulator And Door Window, Removing And Installing
1
-
Door component carrier
2
-
Window regulator
Removing:
-
Door component carrier removed
-
To remove, drill heads off pop rivets - 3 -, knock out rivet stems and detach window regulator.
-
Shake door component carrier so that pop rivet stems fall out.
3
-
Pop rivet
-
Install rivets using VAG1753 pop rivet pliers.
-
Install rivets in following order: - a -, - b -, and - c -.
-
Diameter of rivet -a- = 4.8 mm
-
Diameter of rivets -b- and -c- = 6.0 mm