A6 Quattro Sedan V6-3.0L (AVK) (2002)
Power Trunk / Liftgate Lock Actuator: Service and Repair
Rear Lid Lock Actuator, Removing and Installing
Rear Lid Lock Actuator, Removing And Installing
1
-
Release handle
-
To remove, disengage locating hooks and pull out release handle
2
-
Seal
3
-
Lock actuator
Removing:
-
Tailgate trim removed
-
Lock system removed
-
Using screwdriver, press in and disengage locating hooks on left release handle - 1 - in direction of arrow - A -.
-
Pull left release handle - 1 - downward out of handle mechanism - 4 -.
-
Remove Phillips-head screws - B - and remove lock actuator.