A6 Quattro Sedan V6-3.0L (AVK) (2002)
Figure 2
Rear lid hinge cover, removing
-
Open rear lid.
-
Remove cover (Figure 2, Point 3) from hinge lever (Figure 2, Point 2) on left/right sides (if applicable).
Figure 3
Gas-filled strut, removing
-
Using a screwdriver, push back retaining springs (Figure 3, Point 1) slightly at both ends of gas-filled struts and remove strut (Figure 3, Point 2).
NOTE: When removing or installing the gas-filled strut, push back the opened rear lid slightly beyond its normal position, being careful not to
damage components.
Figure 4
Hinge joints, lubricating
With gas struts removed: Prior to applying Universal Oil on 4 hinge pivot points of each hinge: