A6 Quattro Sedan V6-3.0L (AVK) (2002)
Power Seat Motor: Removal and Replacement
Seat Height Adjustment Motor (Power Seat With Memory), Removing and Installing
Seat Height Adjustment Motor (Power Seat With Memory), Removing And Installing
NOTE: Observe motor versions for seat height adjustment
-
Before removing, run seat to highest position.
-
Remove seat.
-
Remove outer side panel of seat
-
Disengage spring - 1 - from hook - 2 -.
-
Disconnect connector - 2 -.
-
Remove screws - 3 - (3x).
Tightening torque: 4 Nm (35 in.lb)
-
Motor - 1 - does not have a basic setting; the motor and seat can be in any position when removing and installing.
-
After installing motor, engage spring - 1 - over hook - 2 -.
WARNING: Injury risk: Spring is under strong tension.
-
A wiring adapter will be required; the type of adapter depends on the installation layout.