A6 Quattro Sedan V6-3.0L (AVK) (2002)
Brake Pad: Service and Repair
Rear Brake Pads (C38), Removing and Installing
Brake pads, removing and installing
Special tools and equipment
^
3272 reset tool
^
3272/1 support plate
Removing
Note: If re-using brake pads, mark them so that they can be installed in their original positions to prevent uneven braking.
-
Remove wheels.
-
Counter-hold guide pins and remove self-locking bolts from brake caliper housing.
-
Remove brake pads.
Installing
Note: Before pushing back the piston, siphon some of the brake Fluid out of the brake Fluid reservoir. When siphoning brake Fluid, always use a
bleeder bottle that is used exclusively for brake Fluid. Brake Fluid is poisonous. NEVER siphon brake Fluid with your mouth!