A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
Install pad retaining springs.
-
Install pads.
-
Ensure pads are located in pad retaining springs (arrows).
Note: The repair kit includes four self-locking hex bolts which must be installed.
-
Secure caliper housing with new self-locking bolts.
-
Make sure brake hose is not twisted when installed.
-
Tightening torque for securing caliper housing: 35 Nm
Note: After replacing brake pads and before moving vehicle, always depress brake pedal several times firmly to properly seat brake pads in their