A6 Quattro Sedan V6-3.0L (AVK) (2002)
Crankshaft: Service and Repair
Crankshaft, Removing and Installing
Crankshaft, removing and installing
Note: For engine disassembly and assembly, mount engine to assembly stand using VAS6095 holding fixture, Refer to Engine, Service and Repair.
1. Bolt for bearing cap
^
Always replace
^
Tightening sequence, Refer to Fig. 5.
2. Bushing
^
Insert in cylinder block
3. Drive chain gear for oil pump
^
removing and installing, Refer to Oil Pump, Service and Repair.
4. Bearing caps
^
Note identification, Refer to Fig. 1.
^
Removing, Refer to Fig. 2.
^
Installing, Refer to Fig. 5.
5. Nut for bearing cap
^
Always replace
^
Tightening sequence, Refer to Fig. 5.
6. Thrust washer