A6 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-1578002.png)
-
Remove bolts (arrows).
-
Remove air guide -1-.
-
Detach Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-1- at air filter housing.
-
Disconnect electrical harness connector -2- at Mass Air Flow (MAP) sensor.
-
Remove air guide hose -3- together with Mass Air Flow (MAF) sensor.
-
Remove air filter housing (arrows).
-
Disconnect vacuum hoses -2- and -3 at intake manifold change-over valve -N156-.
-
Disconnect vacuum hose -6- from check valve.
-
Disconnect electrical harness connector -5-.
-
Move hose of crankshaft housing ventilation free (arrow).
-
Remove bolts -1- , -4- and -7- for holding plate for solenoid valves.
-
Remove holding plate for solenoid valves.
