A6 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-1817003.png)
-
Remove bolt (arrow) and disconnect air guide -2- at throttle valve control module.
-
Disconnect hose -1- from air guide if installed.
NOTE: Illustration depicts air guide with the removed engine from rear.
-
Remove cover -1- in engine compartment (left side).
-
Remove coolant reservoir (arrows).
-
Disconnect electrical wiring to Engine Coolant Level (ECL) Warning Switch -F66- at bottom of expansion tank.
-
Tie coolant expansion tank with connected coolant hoses -1 to 3- to side.
