A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
Remove heat shield -1- for right drive axle.
NOTE: Flex joint in front exhaust pipe must not be bent more than 10°, otherwise it may be damaged.
-
Disconnect exhaust system at right double clamp (right arrow).
-
Remove heat shield above exhaust system.
-
Remove heat shield for drive shaft (arrows).
-
Remove bolts at flange of transmission/drive shaft.
-
Push drive shaft to rear final drive together. The constant velocity joints can be adjusted axially.
-
Rest drive shaft on exhaust system.