A6 Quattro Sedan V6-3.0L (AVK) (2002)
Fog/Driving Lamp Bulb: Service and Repair
Front Fog Light Bulbs, Removing and Installing
Fog Light Bulbs, Replacing
Fog lights - threaded cover:
Removing
-
Remove Phillips head bolts -2- at housing cover.
-
Disengage wire clamp -1- and remove bulb from housing.
-
Disconnect electrical harness connector -A- of lamp from wire connector in housing cover.
Installing
Installation is reverse of removal, noting the following:
-
Insert new bulb into housing, do not touch glass cone with bare hands.
-
Secure bulb using wire clamp.
-
Re-connect harness connector and close housing cover.
Fog light - cover with bayonet connection
Removing