A6 Quattro Sedan V6-3.0L (AVK) (2002)
Fluid - A/T: Service and Repair
5 Speed Automatic 01V
ATF, checking and changing
ATF level, checking
Special Tools and Equipment
-
VAS5051 tester with VAS5051/1 diagnostic cable (or VAG1 551 Scan Tool with VAG1551/3 cable)
-
VAG1306 drip tray
-
VAG 1924 ATF filler tool
-
Protective goggles
Test requirements:
-
Transmission must not be in emergency running mode.
-
Vehicle on level ground.
-
Selector lever in "P", let engine run at idle.
-
A/C system and heating switched off.
-
ATF temperature must not be higher than 30°C at start of test, allow transmission to cool if necessary.
Notes: