A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
Place torque wrench horizontally on socket head of tensioning lever.
-
Turn with 25 Nm in direction of arrow to tension toothed belt.
-
Insert T40028 socket at camshaft adjuster of exhaust camshaft on left cylinder bank.
-
Turn rotor of camshaft adjuster clockwise to 10 Nm up to stop (arrow).
-
Turn rotor of camshaft adjuster at right cylinder bank clockwise to 10 Nm up to stop (arrow).
-
Tighten camshaft adjuster to 100 Nm.
-
Insert caps -2- with new O-rings -1- at camshaft gears and secure them with the securing ring.
-
Remove T40030 camshaft adjuster gauge.
-
Remove T10026 alignment bolt and thread sealing plug of TDC marking with new O-ring into cylinder block.