A6 Quattro Sedan V6-3.0L (AVK) (2002)
Note: Make sure that dead weight of wheel bearing housing does not press on wheel hub. This can damage wheel bearing.
-
When pressing in, pressure piece (VW519) may only lie against bearing inner ring.
Note: While pressing in, wheel bearing housing must be kept as horizontal as possible. Otherwise, wheel hub would tilt in wheel bearing, causing
early damage to bearing.
Fig. 10 Pressing wheel hub into wheel bearing with 82 mm diameter
Note: Make sure that dead weight of wheel bearing housing does not press on wheel hub. This can damage wheel bearing.
-
When pressing in, pressure piece -VW447i- must rest only against bearing inner race.
Note: While pressing in, wheel bearing housing must be kept as horizontal as possible. Otherwise, wheel hub would tilt in wheel bearing, causing
early damage to bearing.