A6 Quattro Sedan V6-3.0L (AVK) (2002)
^
Similar screen appears.
^
Old ECM Part No. and software level are still displayed at (arrows).
Note:
New ECM Part No. and software level are not displayed until process is complete and fault memories have been erased.
-
Select the "Print", then "Screen" button.
^
VAS 5051 will print to printer immediately.
^
VAS 5052 will hold the print until process is complete and then you may take the tester to the printer for printing the screen.
-
Attach print to vehicle Repair Order.
Once programming (flashing) is complete, the control module must be re-initialized:
-
Select the --> button.
The tester requests you to switch the ignition OFF.
-
Switch ignition OFF.
IMPORTANT!
^
Wait at least 20 seconds before switching the ignition back ON (failure to wait at least 20 seconds may damage the ECM).
After waiting 20 seconds:
-
Switch ignition ON.