A6 Quattro Sedan V6-3.0L (AVK) (2002)
NOTE: Once the "Update - Programming" is complete, the control module must be re-initialized.
-
The tester requests you to switch the ignition OFF
-
After waiting 20 seconds, switch the ignition switch to the "on" position
IMPORTANT: Wait at least 20 seconds before switching the ignition back to the "ON" position (failure to wait at least 20 seconds may damage
the TCM)
NOTE: DTCs will be stored in various Control Modules during the "Update - Programming". All DTCs must be erased.
-
Select the (>) continue button -arrow- to erase all fault memories