A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
Connect harness connector to crash sensor at C-pillar.
-
Install rear wheelhousing trim.
-
Install rear seat bench.
-
Remove sticker for deactivated side airbags from door frame of rear door
-
Remove any residual adhesive from door frame using cleaning solvent.
-
Change coding of airbag control module to the code for rear side airbags installed.
See Guided Fault-finding, Body, Body Installation, 69 passenger protection, airbag 8.4E, electrical components, Airbag Control Module -J234-, coding
Airbag Control Module -J234-.
-
Fill out registration card and deliver card to the appropriate distributor or importer for registration. Remove sheet 3 of the registration card from
the owner information packet for the customer.
Sticker for deactivated rear side airbags
-
Place sticker for deactivated side airbag - 1 - on left and right at door frame - 2 - of rear doors (arrow).
-
If other countries require more stickers, affix these above the sticker shown in illustration.