A6 Quattro Sedan V6-3.0L (AVK) (2002)
Installing
NOTE: Do not cut away anti-squeak pad around retaining hooks - 5 -.
-
Lift up anti-squeak pad.
-
Drill out mounting holes to 5.5 mm.
-
Remove burr on back-side.
-
Pull anti-squeak pad over backrest frame.
-
Clip in side airbag - 1 - with anti-squeak pad.
-
Insert screws - 2 -, lift up anti-squeak pad, install nuts and tighten to 5.5 Nm (49 in.lb).