A6 Quattro Sedan V6-3.0L (AVK) (2002)
Battery: Service and Repair
Battery, removing and installing
WARNING!
Always disconnect battery Ground (GND) strap before working on electrical system.
NOTE:
-
Obtain radio code before disconnecting battery.
-
Be sure to activate vehicle features (radio, clock, electric window regulator, engine) when the battery is re-connected
Removing
-
Switch ignition off.
-
Pull off rubber seal of plenum chamber cover in direction of arrow.
-
Remove cover -1- toward front.
-
Disconnect Ground (GND) strap -1- at battery Ground (GND) terminal by loosening hex nut (size = 10 mm).
-
Loosen B+ wire -2- at battery B+ terminal by loosening hex nut (size = 10 mm).