A6 Quattro Sedan V6-3.0L (AVK) (2002)
Fluid Filter - A/T: Service and Repair
Oil Strainer, removing and installing, 5 Speed Automatic 01V
Removing
-
Remove oil pan.
-
Remove two bolts of oil strainer-arrows-.
-
Pull oil strainer off valve body.
Installing
-
Lightly coat suction shoulder of oil strainer with ATF.
-
Apply a thin coat of petroleum jelly to gasket on suction shoulder of oil strainer.
-
Bolt on oil strainer.
-
Install oil pan.
-
Change ATF or top up after repairs.
Tightening torque
Oil strainer to valve body 6 Nm (53 inch lbs.)