A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
If software level of TCM does not require updating, the "Update - Programming" option will not appear, no further work required, disconnect
VAS 5051/5052
-
If software level of TCM requires updating (flashing), the "Update - Programming" option -arrow 1- will appear, proceed to next step
-
Prior to flashing the TCM all DTCs MUST be erased
IMPORTANT: Failure to erase ALL DTCs may cause the "Update - Programming" procedure to fail.
-
Select Diagnosis function 06 "End Output" -arrow 2-
-
Select Diagnosis function "Collection services" -arrow-
-
Select "Check DTC memory - complete system" -arrow- which will interrogate all fault memories
IMPORTANT: If the vehicle has a MIL light on, any DTC checking, diagnosis or repairs are not part of or covered under this recall.
NOTE: If DTCs are found, print and erase all DTCs.