A6 Quattro Sedan V6-3.0L (AVK) (2002)
-
Attach selector lever cable hand-tight to bracket-B-.
-
Attach bracket -B-hand-tight to transmission.
Note: Do not bend or counter-hold the lever/shift rod when pressing on, since the skim mechanism will not be able to be adjusted exactly.
-
Attach selector lever cable to lever and selector shaft.
-
Straighten selector lever cable in bracket -B-.
-
Tighten bracket to transmission (arrows -1-) to tightening torque.
-
Tighten bracket to transmission -arrows 1- and selector lever cable to bracket -arrow 2- with proper torque. Counter-hold at hex head 3-.
-
Install heat shield -A-.
Note: Bolt 3 can be longer for certain engine versions. In addition, a bracket for the exhaust system can be installed on it.