A6 Quattro Sedan V6-3.0L (AVK) (2002)
/Page-2975006.png)
Fig. 10 Pressing in tapered roller bearing outer race
-
The outer race must be oiled and installed using VW408A punch and 30-205 thrust pad
Fig. 11 Pressing on tapered roller bearing inner race
-
Insert drive pinion with a new spacer sleeve.
WARNING!: Wear protective gloves!
-
Heat up small tapered roller bearing inner race to approximately 100°C and insert on drive pinion.
-
Press drive pinion upward and insert bearing up to stop using 40-21.
Fig. 12 Replace O-ring
-
Inserting O-ring with gear oil
