A6 Quattro Sedan V6-3.0L (AVK) (2002)
Seals and Gaskets: Service and Repair
Seal For Driveshaft Output Flange, Replacing
5 Speed Automatic 01V
Rear Flange Shaft Seal
Tools required
-
3402-thrust tube
Removing
-
Remove front exhaust pipes:
-
Remove heat shield for drive shaft from cover for Torsen differential (arrows).
-
Remove drive shaft -1- at transmission and place this on the heat shield -2-
-
Secure drive shaft to bracket for fuel lines using wire (arrow) or support drive shaft using VAG1383A transmission lift.
-
Drain transmission fluid from transfer case.