A6 Quattro Sedan V6-3.2L (BKH) (2005)
-
Remove clamping screws - 2 - with a punch dia. 4 mm - Item 1 - from left side.
-
Remove clamping screws - 3 - with a screwdriver - 4 - from right side - arrow -.
-
Open glove compartment cover by pulling cable.
-
Remove glove compartment cover and lead cable out of glove compartment.
Installing
Installation is reverse of removal, but note the following:
-
Adjust glove compartment cover cable => [ Glove Compartment Cover Cable, Adjusting ] See: Storage Compartments and Covers Overview.
-
Install glove compartment.
Tightening Specifications