A6 Quattro Sedan V6-3.2L (BKH) (2005)
Use protective backings
-
It should no longer be possible to remove the protective cap from the brake caliper housing by hand.
-
Thinly coat piston and seal with Assembly Paste before inserting.
-
Lift the brake piston, as shown, with commercially available extension and ratchet adapter and lightly press against the protective cap.
Do not angle piston, to avoid damaging the seal sleeve.
-
Blow the protective cap on with pressurized air (max. 3 bar). The protective cap will thereby jump over the brake piston.